Electric scooters are popular and fun. But they are not always waterproof. Water can damage the scooter’s components. This guide will help you make your e-scooter waterproof.
Credit: www.kaabousa.com
Materials Needed
- Dielectric grease
- Silicone sealant
- Waterproof tape
- Mini screwdriver set
- Paper towels or microfiber cloth
- Duct tape
Credit: www.amazon.com
Steps to Waterproof Your E-Scooter
1. Protect The Connectors
Connectors are critical parts of your e-scooter. Use dielectric grease to protect them. It keeps moisture and air away from the connectors.
2. Remove The Skid Plate
Use a mini screwdriver set to remove the skid plate. This gives you access to the bottom deck. Be careful while removing screws.
3. Apply Silicone Sealant
Silicone sealant is great for waterproofing. Apply it around the edges of the bottom deck. Ensure you cover all gaps. This keeps water from entering.
4. Seal Any Holes
Look for any holes in the scooter’s body. Use silicone sealant to close these holes. This prevents water from getting inside.
5. Reinstall The Bottom Deck
Once the sealant is applied, reinstall the bottom deck. Make sure it is securely fastened. This helps keep the sealant in place.
6. Seal The Deck
Use waterproof tape to seal the deck. This adds an extra layer of protection. Cover all the edges and joints.
7. Cover The Charging Port
The charging port is very vulnerable. Use duct tape to cover it when not in use. This keeps water out.
Additional Tips
- Store your scooter in a dry place.
- Use a waterproof cover for added protection.
- Always dry your scooter after it gets wet.
- Regularly check for any new leaks or cracks.
Conclusion
Waterproofing your e-scooter is essential. It helps extend the life of your scooter. Follow these steps to keep your scooter safe from water damage. Enjoy your rides without worrying about the rain.
